Construction Ndt And Welding Inspector

Construction Ndt And Welding Inspector
Empresa:

Gigroup



Função de trabalho:

Engenharia

Detalhes da Vaga

We are currently recruiting for our client who is an international leader in the field of plant engineering and they are looking for a Construction NDT and Welding Inspector for their new project located in Sines, available to start immediately. Main Responsibilities:
The NWI operatively reports to the Construction Quality Manager.
To witness the welding coupon and destructive non-destructive test execution on shop or at Laboratories for preparation of Procedure Qualification Record (PQR);
To support the Home office Welding Group during cycle for the approval of Procedure Qualification Record (PQR), Welding Procedure Specification (WPS) and PWHT procedure;
To witness the Subcontractor Welder Qualification process;
To check that welding material respects the requirements of the approved WPS;
To check that welding machines and ovens are continuously calibrated;
To check that shop and field welds are performed in compliance with PROJECT specifications and with approved WPS/PQR, NDE and PWHT Procedures, etc.;
To witness the execution of non-destructive tests, heat treatment and hardness test;
To check the execution of positive material identification test;
To grant that welding activities and the tests are recorded by Subcontractors in the welding data base;
To check that all repairs are performed correctly, and non-destructive tests are regularly repeated;
To obtain any necessary approval from Home Office Welding Group for deviation, as appropriate, to welding procedures and for performing repairs requiring special procedures;
To verify the adequacy of information on NDE Reports;
To verify that adequate and valid welder approvals are available and that only approved welders as required are used in production. Ideal Profile:
3 years in equivalent position in medium/big size construction sites;
Bachelor´s degree;
Fluent in English;
Availabilityto work fully on-site in Sines (Mon-Fri). Three level II qualifications according to ISO 9712:
VT
PT or MT
RT or UT
Plus:
CSWIP 3.1 qualification.
Conditions:
Attractive salary conditions;
Meal card:
350€/monthly gross. #pt_bkc
Os candidatos interessados, em cumprimento do definido no Regulamento (UE) 2016/679 (RGPD), são convidados a ler a política de privacidade em


Fonte: Grabsjobs_Co

Função de trabalho:

Requisitos

Construction Ndt And Welding Inspector
Empresa:

Gigroup



Função de trabalho:

Engenharia

Engenheiro De Manutenção Mecânica

Empresa de referência no mercado português, com grande aposta na inovação e sustentabilidade pretende reforçar a sua equipa com um(a) Engenheiro(a) de Manute...


Desde Robert Walters Plc - Setúbal

Publicado a month ago

Eletrotechnical Project Engineer

At Galp, we believe that together we can make a difference in society by contributing to a more sustainable energy future. Changes starts with our people, wh...


Desde Grabjobs Portugal - Setúbal

Publicado a month ago

Engenheiro Eletrotécnico - Sinalização Ferroviária (M/F) Setúbal

Criada em 2016, a Get The Job recruta e seleciona o melhor talento para as melhores e mais interessantes Organizações. Através da sua equipa de Recrutamento ...


Desde Get The Job - Setúbal

Publicado a month ago

Engenheiro Eletrotécnico - Sinalização (M/F) Almada

Criada em 2016, a Get The Job recruta e seleciona o melhor talento para as melhores e mais interessantes Organizações. Através da sua equipa de Recrutamento ...


Desde Get The Job - Setúbal

Publicado a month ago

Built at: 2024-05-20T13:00:46.604Z